제품소개
Drying and Dehumidifying
Directly Air Type Dehumidifier and DryerDrying and Dehumidifying
EMDE series machine is combine dehumidifying and drying into one unit.
Feature
- This series machine adopt microcomputer controller and P.I.D Temperature control technology, can accurately control temperature.
- Heatless regenerator of dehumidifying and drying offer lower dew point wind.
- Directly installed on material inlet of IMM, can avoid dried material wetting back because of external contacting.
Specification
| Model EMDE- | 6.5-HD | 10-HD | 15-HD | 25-HD | |
|---|---|---|---|---|---|
| Nominal Capacity Flow | N㎥/min | 0.1 | 0.15 | 0.2 | 0.3 |
| Nominal Pressure Dew Point | ℃ | -40 | |||
| Specified Work Pressure | MPa | 0.7 | |||
| Max. Work Pressure | MPa | 1.0 | |||
| Min. Work Pressure | MPa | 0.4 | |||
| Specified Air Inlet Temperature | ℃ | 35 | |||
| Max. Air Inlet Temperature | ℃ | 50 | |||
| Work Envirionment Temperature | ℃ | 0~40 | |||
| Regeneration Air Consumption Rate | % | =15 | |||
| Differential Pressure | MPa | =0.02 | |||
| Work Power | 220V/50Hz | ||||
| Protection Level | IP65 | ||||
| Noise | Db(A) | =75 | |||
| Material Barrel Capacity | L | 8 | 15 | 25 | 40 |
| Heater Power | W | 200 | 800 | 1500 | 2000 |
| Dimension (W×D×H) | mm | 420×410×650 | 460×450×820 | 530×520×850 | 580×570×890 |
※ We reserve the right of change the specifications without prior notice.