Dehumidifying Drying Combination | 부여템프콘, 부여 중고사출기, 부여설비 BooyeoTempcon

제품소개

Even in high humidity envirionment, dehumidifying drying combination can provide a stable and efficient drying of material.
Central dehumidifiers are equipped with a closed loop system to provide continuous low dew point and dry wind.
It fully dries the plastic of high moisture absorption to ensure the quality.
Air design and cyclone exhaust port in dry hopper further improved drying efficiency.
Bottom blowing type air design and cyclone exhaust port in dry hopper further improved drying efficiency.
Stainless steel hopper, with insulation layer and material viewing window.
Separate heating control, can set different dry temperature of different material.

Eletronic Hopper adopt high accuracy photoelectric switch, control feeding of every station accurately. Vacuum Hopper uses high sensitive sensor switch which ensures the supply of material to avoid the interruption of production.
Stainless steel hopper, avoid raw materialsecond pollution when it's conveying.
Stainless steel filter inside, filter granule enter into suction pipe.

Model			ES-6	ES-6E	ES-12	ES-12E	ES-24	ES-24E	ES-36	ES-48
Hopper capacity		L	7.5	7.5	12	12	24	24	36	48
Dimension	H	mm	480	600	500	700	690	820	930	975
	D	mm	225	225	285	285	285	285	315	350
	W	mm	310	310	330	330	400	400	400	485

※ "E" refers to Elecronics Hopper, can be directly installed in inlet of machine.

Model		EMDS-2×2	EMDS-3×3	EMDS-4×4
Ingredients Pipe Diameter	inch	1.5	1.5	1.5
		2.0	2.0	2.0
		2.5	2.5	2.5
Dimension H×D×W	mm	1100×600×600	1100×600×600	1100×800×800

Model		EMDS-5×5	EMDS-6×6	EMDS-8×8
Ingredients Pipe Diameter	inch	1.5	1.5	1.5
		2.0	2.0	2.0
		2.5	2.5	2.5
Dimension H×D×W	mm	1100×800×800	1100×1000×1000	1100×1000×1000

Automatically control, other feeding all adopt automatic control after manual feeding to hopper, operator only need to do with human-computer interface.
Advance efficiency, shorten production cycle, system can supply different raw materials to multiple molding equipments.
Adopt central distribute station and connector shifted way, let customer shift pipe quickly, use different material, meet molding machine requirements of using different material, avoid discontinued phenomenon caused due to human factors.

Cutting material before dried material enter pipeline, avoid material vestigital in the pipeline.
Control output via adjust cutting time, avoid suction too much and stayed in the storage hopper too long that interfere molding.
Can select dried air circulation feeding.