부여템프콘, 부여설비 BooyeoTempcon

Skip to Container

Heatless Energy-saving Type All-in-One Compact DryerDrying and Dehumidifying

Feature

  • Combine the function of dehumidifying, drying and two-stage conveying into single unit, heatless regenerator of dehumidifying and drying can provide with lower dew point dry air, can freely chosen needed drying air capacity, drying temperature, drying time and dew point value etc. according to real prduction demand, self-optimized and adjusting regeneration temperature to achieve energy-saving and environment protecting, compared with traditional model, can save above 60% energy consumption.
  • Dew point value of drying can reach -70℃, drying barrel capacity is 5~6000kg, can meet the production demand of different environment and dosage.
  • ENM-Intelligent two-channerl P.I.D self-optimized temperature controller and unique energy & airflow management software, can real-time, intelligent, accurate control and self-optimized working state of whole machine, to reach energy saving and environment protecting. Dew point monitor is optional, convenient to monitor dew point at any time.
  • Small size of whole, high-effect working performance, have characteristics of good dehumidifying effect and high air ventilating, can provide stable low dew point dry air for system, with energy saving and heat preservation drying material barrel, the surface temperature of drying material barrel is below 40℃ when drying temperature reached 180℃, hermetic system control to achieve efficient use of energy and decrease unnecessary consumption of electric energy.
  • Equipped with hot air recycling system, can avoid environment be polluted by exhausted air, with shut-off suction box, can make sure no vestigital on pipe when conveying. Hermetic circulatory system can prevent dried material from moisture regaining because of outside contacting.
  • Drying air can evenly upward diffusion from barrel bottom, to ensure drying air can evenly dry material that after dehumidified, achieve steady and rapid dehumidifying and drying of raw material.

Specification

Model EMDE- 12 25 50 75 100 150 200
Drying Fan Power kw 0.05 0.135 0.135 0.17 0.17 0.2 0.2
Drying Heating Power kw 2.2 3 4 4.5 6 7.2 12
Full Insulation Barrel Capacity L 20 40 80 120 160 230 300
High-Pressure Air Capacity 0.2 0.2 0.2 0.2 0.2 0.3 0.3
High-Pressure Air Tension 6~8
Feeding Fan Power kw 0.75 0.75 0.75 0.75 0.75 0.75 0.75
ES-* Vacuum Power L 3 3 7.5 7.5 7.5 7.5 7.5
ES-* E electrical Hopper L 3 3 7.5 7.5 7.5 7.5 7.5
Size of Suction Pipe inch 1.5 1.5 1.5 1.5 1.5 1.5 1.5
Dimension H mm 1070 1850 1850 2250 2180 2430 2430
H1 mm 970 1370 1370 1370 1600 1600 1850
W mm 715 1070 1070 1070 1190 1190 1350
D mm 550 620 620 620 820 820 900
Weight kg 120 300 300 300 410 410 530

※ We reserve the right of change the specifications without prior notice.

  • Three sections feeding function is optional, model plus M3.
  • For models that are equipped with dew-point monitor, model plus D.
  • Voltage specification : 3Ø, 400V, 50Hz.

Information