부여템프콘, 부여 중고사출기, 부여설비 BooyeoTempcon

Skip to Container

Mold Temperature ControllerHeating and Cooling

We minimized temperature difference with mold, by installing semi-mold inside system. It is substitued for existing oil type system with high efficiency. Cooling time is very fast by piping system that raise temperature up to 130℃.

Feature

  • Installed semi-mold inside system (Minimized temperature difference with mold)
  • Manufactured by stainless steel (Tank, pipe laying) for durability improvement
  • Auto control device to prevent stand-by revolution
  • Use of long-life pump (GRUNDFOS)
  • High efficiency with using water
  • High quality and high productivity by accurate temperature control
  • Removing device of Mold remaining water (One touch)
  • Part of the up, downside and mold temperature management (1~10 Zone)
  • High productivity by direct input was of the cooling water. Water temperature or the temperature of the mold can be managed to ±0.1~5℃

Flow Sheet

Specification

Model BYTC101 BYTC102 BYTC201 BYTC202
Voltage 220/380V 50/60Hz
Mold Temperature Max. 130℃
Medium Pure Water
Temperature Control Type Semi-mold PD Temperature Type
Heater Capacity kw 6×1 6×2 8×1 8×2
Pump Capacity kw 0.375×1 0.375×2 0.55×1 0.55×2
Max. Ejection Flow L/min 50×1 50×2 80×1 80×2
Max. Ejection Pressure kg/㎠ 2~6
Injection Machine Ton Max. 350 Max. 550
Size (W×L×H) mm 350×700×850 610×700×850 350×700×850 610×700×850
Weight kg 70 90 70 90
Model BYTC301 BYTC302 BYTC401 BYTC402
Voltage 220/380V 50/60Hz
Mold Temperature Max. 130℃
Medium Pure Water
Temperature Control Type Semi-mold PD Temperature Type
Heater Capacity kw 10×1 10×2 12×1 12×2
Pump Capacity kw 1.1×1 1.1×2 1.5×1 1.5×2
Max. Ejection Flow L/min 120×1 120×2 160×1 160×2
Max. Ejection Pressure kg/㎠ 2~6
Injection Machine Ton Max. 850 Max. 1300
Size (W×L×H) mm 350×700×850 610×700×850 400×1100×950 690×1100×950
Weight kg 70 95 90 110
  • We reserve the right of change the specifications without prior notice.
  • Special specifications would be acceptable.

Information