부여템프콘, 부여설비 BooyeoTempcon

Skip to Container

Honeycomb DehumidifierDrying and Dehumidifying

The reason of causing Bubbles, crazing, cracking, flow marks, poor transparency is that the plastic is not fully dried before it's formes. The hygroscopic of plastic like PA, PC, PBT, PET, NYLON is strong. The traditional dryer can't dry it completely because the water penetrates into the internal of the plastic.

Practice proves that reducing the drying wind dew point below -40℃ and controlling its temperature can dry the material and reduce the moisture ration below 0.02%. Honeycomb dehumidifying dryer fully dehumidify the air in the closed loop system to achieve the effect of dehumidification drying.

Feature

  • Temperature Control System
    It adopted P.I.D temperature control system and working state indicator light. Can precisely control and know operation conditions clearly.
  • High Efficient Cooler
    Special cooler structure design ensures lower return air temperature and dew point.
  • Return Air Filter Device
    Absorbing about 99.9% of the dust through high efficient particulate filter avoid the honeycomb rotor from dust pollution.
  • Excellent Working Performance
    • Independent Environment Dew Point reach to -60℃
    • Strict performance index and productive technology, excellent performance, high efficiency, low consume, easy operation, stable performance. It offers dry air to absorb the moisture on the material to meet the requirement.
    • It's suitable for drying hygroscopic engineering plastic such as, PA, PC, PBT, PET, etc.
    • It can be moved to the suitable working place as customer's need.
  • Easy Management of Dew Point
    Dew point and return temperature can be set by customers' need to reduce energy consumption.
  • East Maintenance
    Equipped with two high-efficiency filter, use the high pressure air to remove the dust on the filters. Fast and convenient.

Specification

EDH 30 50 100 150 200 300 400 500 800 1000 1500 2000
Regenerative Power kw 3 3 3 4 4 7.2 7.2 9 12 15 20 20
Regenerative Fan Power kw 0.18 0.18 0.18 0.4 0.4 0.75 0.75 1.75 2.2 2.2 2.2×2 2.2×2
Drying Power kw 3 4 6 7.2 9 15 18 21 24 36 24×2 36×2
Drying Fan Power kw 0.18 0.4 0.75 1.75 2.2 3.4 5.5 7.5 9 13 9×2 13×2
Dry Air Capacity ㎥/hr 30 50 100 150 200 300 400 500 800 1000 1500 2000
Pipe Coupling inch 2 2 2 2.5 2.5 3 3 4 4 5 6 8
Dimension H mm 1360 1360 1360 1610 1610 1745 1745 1935 1935 1935 2060 2060
W mm 530 530 530 650 650 650 650 750 750 1350 1500 1500
D mm 820 820 820 1050 1050 1255 1255 1380 1380 1380 1380 1380
Weight kg 145 155 170 260 265 320 350 470 560 700 1080 1360

※ We reserve the right of change the specifications without prior notice.

Optional Device for Choose

  • PLC controller to work with LCD touch screen, with Ethernet remote monitor and manage, more easier operate.
  • Dew point monitor is available as an option for monitoring dehumidifying effect. Dry heater and temperature controller device is optional, with drying hopper tank can dehumidify platic material.

Humidity and moisture content comparison table

Dew Point Relative Humidity Moisture Content
PPM %
+20 100 23072 2.307
+10 52.5 12117 1.212
0 26.10 6027 0.603
-10 11.20 2574 0.257
-20 4.40 1025 0.103
-30 1.60 378 0.038
-40 0.60 128 0.013
-50 0.20 39 0.004
-60 0.07 13 0.001
  • Touch-control screen
  • Card slot type control module
  • Switch module
  • Communication cable

Information